The main difference between the two nails is that roofing nails are designed to come out, unlike the facing nail, which must be secured in the coating for its lifetime. Roofing nails will need to be replaced from time to time, so the larger nail head design allows for an easier grip to remove them. Siding nails are longer than roofing nails because they have to support more weight. They are not designed to be removed, so they have smaller diameter heads and ringed shanks that better hold the wood.
The roofing nailer is used for roofing or re-roofing that is made of asphalt, insulation board and fiberglass. Just remember that cladding nails and roofing nails are not the same thing, and they cannot be used instead of one or the other. In most situations, you'll want separate nails for the two separate tasks. If you need to replace the liner, you can always let a team of experts like the one we have at Conservation Construction of Texas do the liner installation for you.
This ensures that the coating is installed correctly the first time. Get your free quote for the new coating here and comment below which part of the article you found most fascinating. Thanks for reading and see you next time. Roofing nailers are often used to secure shingles to the surface.
Whereas cladding nailers are only used to fix cladding materials. Facing nailers and roofing nailers may look similar and serve the same function, but they are not the same tool. You may be able to use a different type of nailer, but you won't be able to achieve quality results. Since roofing nailers are much cheaper, many would prefer to buy one to perform the work of a facing nailer.
Looking at them side by side, it can still be difficult to distinguish a roofing nailer from a cladding nailer. They also come in longer sizes than roofing nails, as some cladding applications require longer fasteners, so they are designed more like a nailer for framing coils. The coating is not 100% waterproof, so it has a wrapper underneath that can disperse small amounts of water. Roofing nailers have to drill their nails through the asphalt shingles; a job possibly more difficult than driving through the siding.
Cladding and roofing nails are designed to perform different jobs and are therefore constructed differently. You could probably use a roofing nailer, if you are able to provide the nail with enough power so that the head is not visible on the surface. As a civil engineer and roofer, I love to share the experience I have gained in recent years. So what is different from another nail gun? Well, a unique feature of this roofing nailer is that it can drive spiral nails.
If you Google a roofing nailer for cladding, you will get a series of forum posts that discuss the pros and cons. Finally, roofing nails are much shorter, as they don't have to support a lot of weight and only have to drill a thin tile and a single layer of wood. You may be able to use a roofing nailer for cladding if you “nail them blindly” so you don't see the nail head at all. People often seek to understand the key differences between these two very similar nail guns, roofing nailer and coating nailer.
Leave a Comment